YSI BOD Analyst Pro - Manual (Page 59)

YSI BOD Analyst Pro ® User Manual 59
SECTION 7 TAKING FINAL DO READINGS
7.1 SELECTING A BATCH
From the main menu (Bench Sheet) window enter the date of the batch for which you would like
to take readings. Enter this date in the field Sample Date. Sample Date is the date which you
started the BOD test incubation period, hence the date you read Initial DOs.
Alternatively you may click the Open Batch button to select a batch that is not yet complete. The
submenu defaults to Open where you will see batches displayed by date from the last 33 day
period. Note that the All choice allows you to see batches that are yet to be read along with
batches that have final readings.
If an error message pops-up indicating communication problems it typically means that a COM#
other than COM0 is assigned from a previous application. You may click Continue to select your
batch but make certain that you correct the communication setup before reading Final DOs.
Select the July 16, 2010 open batch and click OK.