YSI NiCaVis 701 IQ NI User Manual

Page 62

Advertising
background image

Appendix: Glossary

NiCaVis 70x IQ NI

10 - 2

ba76132e01

03/2013

Measuring gap

The measuring gap is between the two measurement windows. In the

measuring gap, the light beam penetrates the test sample.

Measured value

The measured value is the special value of a measured parameter to

be determined. It is given as a combination of the numerical value and

unit (e. g. 3 m; 0.5 s; 5.2 A; 373.15 K).
The measured value is determined from the raw value taking into

account the data from a user calibration.

The measured value is displayed together with the raw value in the

measured value display.

NO2-N

The proportion of nitrogen coming from nitrite.

NO3-N

The proportion of nitrogen coming from nitrate.

Zero adjustment

Measuring and saving the absorbance spectrum of ultrapure water.

Defines the zero points in the spectrum for all wavelengths. The light

beam is not alleviated at the zero point. The zero point influences the

calculation of the raw value.

Sample matrix

Composition of the test sample of different individual substances.

Reference sample

Random sample of the test sample for comparative chemical-analyt-

ical laboratory analyses intended for user calibration.

Ultrapure water (H2O

dist.)

Ultrapure water is distilled or deionized water suitable for analysis

purposes.

Raw value

The raw value is determined from the spectrum while taking into

account the data from the zero adjustment. The raw value is displayed

on the right side of the measured value in the measured value display.

SAK, SAC

Spectral absorption coefficient at a certain wavelength. The SAC 254

value is a measure of the contents of organic compounds.

Spectrum

Distribution of the absorbance depending of the wavelength.

With the aid of the zero adjustment and user calibration, the measured

values are calculated from the spectrum.

TOC

Abbreviation for total organic carbon. Total amount of organically

bound carbon in water.

UVT

Transmission measurement at a certain wavelength.

The UVT-254 value is standardized to 10 mm gap width.

Advertising
This manual is related to the following products: