8 lists, Lists, 8lists – Xylem COND3110 HANDHELD CONDUCTIVITY METERS User Manual

Page 37

Advertising
background image

Cond 3110

Lists

37

ba75792e02

11/2008

8

Lists

This chapter provides additional information and orientation aids.

Specialist terms

The glossary briefly explains the meaning of the specialist terms.
However, terms that should already be familiar to the target group are
not described here.

Index

The index helps you to find the topics that you are looking for.

Glossary

Adjusting

To manipulate a measuring system so that the relevant value (e. g. the
displayed value) differs as little as possible from the correct value or
a value that is regarded as correct, or that the difference remains
within the tolerance.

AutoRange

Name of the automatic selection of the measuring range.

Calibration

Comparing the value from a measuring system (e. g. the displayed
value) to the correct value or a value that is regarded as correct.
Often, this expression is also used when the measuring system is
adjusted at the same time (see adjusting).

Cell constant, k

Characteristic quantity of a conductivity measuring cell, depending on
the geometry.

Conductivity

Short form of the expression, specific electrical conductivity.
It corresponds to the reciprocal value of the resistivity.
It is a measured value of the ability of a substance to conduct an
electric current. In water analysis, the electrical conductivity is a
dimension for the ionized substances in a solution.

Measured parameter

The measured parameter is the physical dimension determined by
measuring, e. g. pH, conductivity or D.O. concentration.

Measured value

The measured value is the special value of a measured parameter to
be determined. It is given as a combination of the numerical value and
unit (e. g. 3 m; 0.5 s; 5.2 A; 373.15 K).

Molality

Molality is the quantity (in Mol) of a dissolved substance in 1000 g
solvent.

Reference

temperature

Fixed temperature value to compare temperature-dependent
measured values. For conductivity measurements, the measured
value is converted to a conductivity value at a reference temperature
of 20 °C or 25 °C.

Advertising