Power indicators, Button labels, Power indicators -6 button labels -6 – Extron Electronics Fiber Matrix 6400 User Manual

Page 32: Operation, cont’d

Advertising
background image

Operation, cont’d

Fiber Matrix 6400 Switcher • Operation

3-6

f

Esc button — The Esc button has two primary functions (•) and four

secondary functions (❏):
• Cancel operations or selections in progress and reset the front panel

button indicators.

N

The Esc button does not reset the current configuration or any presets.

• Flashes once to indicate that the escape function has been activated.

In the I/O Group mode, select group 4 and indicate its selection.

See “I/O grouping” on page 3-17.

With the Enter, Preset, and View buttons, select Serial Port Selection and

Configuration

mode. See “Selecting the rear panel Remote port protocol

and baud rate” on page 3-27.

Select 115200 baud for the RS-232/RS-422 port in Serial Port Selection and

Configuration

mode and indicate its selection. See “Selecting the rear

panel Remote port protocol and baud rate” on page 3-27.

With the Enter button, toggles the front panel lock on and off.

See “Locking out the front panel (Executive mode)” on page 3-25.

Power indicators

g

Primary and Redundant Power Supply LEDs —

Green —

Indicates that the associated power supply is

operating within normal tolerances.

Red —

Indicates that the associated power supply is

operating outside the normal tolerances or has failed. See

chapter 7, “Maintenance and Modifications”, to replace the power supply.

Button labels

The numbered translucent covers on the input and output pushbuttons can be

removed and replaced to insert labels behind them.
Input and output labels can be created easily with Extron’s Button-Label Generator

software, which ships with every Extron matrix switcher. Each input and output

can be labeled with names, alphanumeric characters, or even color bitmaps for

easy and intuitive input and output selection (figure 3-2). See chapter 5, “Matrix

Software”, for details on using the labeling software. See chapter 7, “Maintenance

and Modifications”, for blank labels and a procedure for removing and replacing

the translucent covers.

DVD

VCR

Computer

Computer

Document

Camera

VTG 200

10

13

15

29

28

30 31 32

Figure 3-2 — Sample button labels and icons

POWER SUPPLY

PRIMARY

REDUNDANT

Advertising