Extron Electronics Fiber Matrix 6400 - Manual (Page 50)

Operation, cont’d
Fiber Matrix 6400 Switcher • Operation 3-24
Example 9: Muting and unmuting an output
In the following example, several switcher outputs are muted and unmuted. The
steps show the front panel indications that result from your action.
1 . Clear all selections : Press and release the Esc button.
C O N T R O L
PRESET ENTER ESC VIEW
Press the Esc button to clear all selections.
The button flashes once.
2 . Select View-only mode : Press and release the View button to enter View-only
mode. The View button lights.
C O N T R O L
PRESET ENTER ESC VIEW
1 2 3 4 5 6 7 8 15 16
17 18 19 20 21 22 23 24 31 32
OUTPUTS
Until you select an input, only the buttons for untied outputs light.
Press the View button.
The button lights.
3 . Mute the outputs : One at a time, press and hold the Output 3 button for
approximately 2 seconds until it begins to blink and then the Output 4 button.
The output 3 and output 4 signals are muted.
3
4
3
4
When you push Input 3, it lights and Input 4 returns to unlit
because of ties made in examples 1, 2, and 3. NOTE
The button blinks
to indicate that the
outputs are muted.
The button blinks
to indicate that the
outputs are muted.
Mute outputs one at a time.
2 seconds
2 seconds
Press and hold the Output 3 button.
Press and hold the Output 4 button.