Example 5: grouping inputs and outputs, Example 5: grouping inputs and outputs -19 – Extron Electronics Fiber Matrix 6400 User Manual
Page 45
3-19
Fiber Matrix 6400 Switcher • Operation
Example 5: Grouping inputs and outputs
In the following example, several switcher inputs and outputs are assigned to
groups. The steps show the front panel indications that result from your action.
1
.
Clear all selections
: Press and release the Esc button.
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press the Esc button to clear all selections.
The button flashes once.
2
.
Select
I/O Group mode
: Press and hold the Input 1 and Output 1 buttons for
approximately 2 seconds and then release the buttons.
1
1
17 18 19
1 2 3
17 18 19
1
2
3
Press and hold the Input 1 button and Output 1 button.
Release the Input 1 button
and Output 1 button.
Ungrouped input and
output buttons light.
2 seconds
3
.
Select an I/O group
: Press and release the Enter button to select group 1.
C O N T R O L
PRESET
ENTER
ESC
VIEW
Press and release the Enter button to select group 1.
The button lights to indicate the selection.
1
3
2
4
Group #