Extron Electronics Fiber Matrix 6400 - Manual (Page 76)

Programmer’s Guide, cont’d
Fiber Matrix 6400 Switcher • Programmer’s Guide 4-12
Command/response table for SIS commands (continued)
Command ASCII command
(host to switcher)
Response
(switcher to host)
Additional
description
Save, recall, and directly write presets (continued)
Read room outputs EX*
MR
} X1)
,
X#
1
,X#
2
, ...
X#
n
]
Example: E 3MR } Class 1,01,02,08,09 ] Outputs 1, 2, 8, and 9 are
assigned to room 3, which
named “Class 1”.
Recall room preset X*
*
X(. Rmm
X*•
Rpr
X(] Command character is a
period.
Directly write a room
preset E + X* * X( P X@ * X# ! X@ * X# % X@ * X# $ ... X@ * X# ! } Enter as many ties as are
valid for this configuration.
The ! tie command, & tie,
and % tie commands are all
valid and equivalent.
Rmm
X*•
Spr
X(]
Example:
+7*3P12*7&11*5&4*5%6*6!
Esc
Brackets are shown to
separate ties for clarity only.
Create preset 3 for room 7,
which ties input 12 to output 7,
input 11 to output 5, input
4 to output 5, and input 6 to
output 6.
Rmm07
•
Spr03
]
View ties, mutes, and presets
View output tie X#
&
X@]
Example: 15& 27
] Input 27 is tied to output 15.
View output tie X# % X@]
Example: 7% 02
] Input 2 is tied to output 7.
View output mutes E VM } X$
1 , X$
2 , ... X$ n ] Each X$ response is the mute
status of an output, starting
from output 1. n is the
highest-numbered output.
N
X@
= Input number 00 – 64 (00 = untied)
X#
= Output number 01 – 64
X$
= Mute 0 = not muted, 1 = muted
X*
= Room # (for room presets) 10 max. (Each can have up to 10 presets (
X(
) assigned.)
X(
= Room preset # 00 – 10 (00 = current configuration for room)
X1)
= Name 12 characters maximum for input and output names