Software-based configuration and control, cont’d – Extron Electronics IPL 250 Reference Manual User Manual
Page 52
Advertising
![background image](/manuals/312073/52/background.png)
Software-based Configuration and Control, cont’d
IPL 250 • Software-based Configuration and Control
3-26
A GlobalViewer overall system page
If a device has been set up with an IR or RS-232 driver, click on the device’s name
on the left side of the GlobalViewer window to open a Control page that shows the
available commands for the device. The following screen shot shows one example.
A GlobalViewer device control page
You can click the GlobalViewer’s on-screen buttons to send the corresponding
command from the IPL to that device.
Advertising