Bandwidth, Ed on the data port. for further information, see, Decoder data bandwidth tab – Extron Electronics VN-Matrix 250 User Guide User Manual
Page 70
Decoder audio connection fields
The decoder audio connection fields operate in the same ways as the video connection
fields (see
Decoder video connection fields
on page 62).
Decoder data bandwidth tab
To access the data
Bandwidth
tab from the
Device
tab, click the
Display0
link and, in the
Display
tab, click the
data
link.
This page provides access to the data channel configuration settings. As with the Decoder
video bandwidth page, it also provides statistics and allows the decoder buffer to be
monitored and configured, if necessary.
Figure 44.
Data Bandwidth Tab
Data channel configuration
RS-232 data configuration
Serial Enable
— check this box to receive RS‑232 serial data.
NOTE: Serial data transport also requires configuration of the corresponding
on page 55) and the serial RS‑232 port
parameters (see the
on page 41).
UDP data configuration
Udp Enable
— check this box to receive UDP data.
Udp IP
— enter the IP address of the external device or system that receives UDP traffic.
Unicast or multicast addresses are valid.
Udp Port
— enter the port number used by the external device or system to receive UDP
data.
Decoder data stream statistics
The decoder data stream
Statistics operate in the same ways as the video statistics (see
Decoder video stream statistics
on page 62).
VNM 250 • VNM 250 GUI Overview
64