Managing compression and bandwidth settings, Bandwidth management – simple control, Managing compression and – Extron Electronics VN-Matrix 250 User Guide User Manual
Page 74: Bandwidth settings, Bandwidth management, Simple control
Managing Compression and Bandwidth Settings
1.
Open the encoder Bandwidth tab.
For more information about the
Figure 49.
Encoder Video Bandwidth Tab
Bandwidth Management – Simple Control
1
1
2
2
3
3
4
4
Figure 50.
Encoder Video Bandwidth Tab Less Detail
Video quality and bandwidth
2.
Adjust the maximum bit rate, using the
Bandwidth
slider (see figure 50,
2
), which may
be adjusted from unlimited to 1 Mbps. The selected maximum bit rate is displayed on
the right hand side of the slider bar.
3.
Adjust the amount of spatial compression that is applied to the source image, using the
Video
Quality
slider (see figure 50,
1
).
4.
Set the
Transform
type (see figure 50,
3
):
z
Graphics
is optimized for text and sharp lines, (typically computer input).
z
Video
is optimized for smooth tone changes (typically video content).
5.
The bit rate of the streamed image is monitored at the
Streams
information area of the
Bandwidth
page (see figure 50,
4
). For more information, see
on page 49.
NOTE: The
Streams
information area is only populated once a connection is made
to a decoder.
VNM 250 • Configuration with the VNM 250 GUI
68