ABUS TVCC75200 - Manual (Page 55)

55
4.4 Indoor Adaptor
Indoor Housing Adaptor (TV7608) is not in scope of delivery. Indoor adaptor is for on-ceiling
mounting of cameras.
1. Hold the indoor adapter with the open side facing down in the position you would like to
mount the camera on the ceiling. Use a pen to mark the three drill holes on the ceiling.
2. Drill the three holes and insert a wall plug which is suitable for the ceiling material. Make
sure that the wall plug is able to bear a load of approx. 3 kg.
3. Fit the indoor adapter exactly on the drill holes and fasten the adapter with appropriate
screws. Use nuts to prevent slipping.
4. Connect the individual lines to one another using the cable strap and guide the cable through
the opening in the indoor adapter.
5. Use the four screws supplied to attach the retaining plate of the mount type (included in the
camera’s scope of delivery) to the indoor adapter. To do this, place the mount type plate on
the indoor adapter so that the external drill holes of the plate are exactly on the four spacer
threads of the indoor adapter and screw the four screws in.
6. Proceed in the same way as points 6 to 8 on pages 216 and 217.
Lo
ch
Ш
2
0