ABUS TVCC75200 - Manual (Page 65)

65
To enter OSD Menu, press the MENU button or 95+Preset (Maxpro 90+Preset) and Menu is
displayed:
 Move the joystick up or down to move to the position and left or right to make selection or
change values.
8.2 Dome Setup
To enter Dome setup, move the joystick rightwards when cursor is on dome setup.
1. DOME SET – CAMERA NAME
To set camera name, select up to 16 characters moving Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right and ZOOM
WIDE button to move to the prior character from the right to left.
Space is displayed when “ ” appears.
2. DOME SET – RECOVER
This feature allows the dome to activate the last specified operation (auto scan, group tour,
preset, pattern or sectors) after a programmed time of inactivity or restart after power shut
down.
The procedure is as following: define any operation and then go to DOME SET and change
RECOVER to any value. Recover time can be programmed from 15 second to 99 seconds
and the default setting is OFF.
DEFAULT SETTING
MAIN MENU
DOME SETUP
CAMERA SET
AUTO SCAN
TOUR
PRAVACY
PATTERN
ALARM
SECTOR
EXIT
DOME SET
CAMERA ID
: CAM1□□□□□□□□□□□
RECOVER : OFF
MANUAL SPEED : 150°/S
AUTO FLIP : OFF
ZOOM SPEED : FAST
ALARM
: DISABLE
LANGUAGE : ENGLISH
[NEXT PAGE]
SAVE AND EXIT
EXIT