ABUS TVCC75200 - Manual (Page 76)

76
3. PRIVACY SET – ACTION (MOVE / ADJUST)
To set the blocking area, press FOCUS FAR button when the cursor is on MOVE MODE.
Use Joystick to move to position where masking zone should be.
Then press FOCUS FAR button again to escape of MOVE MODE.
To adjust size of blocking area, move joystick to the right when the cursor is on ACTION.
After Move mode changed to ADJUST MODE, press FOCUS FAR button in order to adjust
the size of blocking area. Use the joystick to adjust the size of blocking area. After adjusting
size of blocking area, press FOCUS FAR button to escape ADJUST mode.
4. PRIVACY SET – SAVE
To save the data after set the privacy masking zone, move joystick to the rightwards when
the cursor is on SAVE. After saving of data, the cursor automatically jumps to PRIVACY
NO.2 to prepare the next privacy masking zone.
5. PRIVACY SET – EXIT
Move joystick to the right to return to main menu.
8.8 Pattern Set
8 programmable patterns are available with 16 characters for title.
After setting the data of each pattern, 81~88 + PRESET buttons are working as Pattern # 1~8.
 Maxpro protocol provides 6 quick operation keys (80~85 + preset) for patterns, but it is possible
to set up to pattern #8.
1. PATTERN SET – PATT NO.
Up to 8 programmable user-defined patterns are available to set by joystick movement.
2. PATTERN SET – PATT TITLE
To set pattern title, select up to 16 characters moving Joystick to the left or right.
Press ZOOM TELE button to move to the next character from the left to the right and ZOOM
WIDE button to move to the prior character from right to left.
Space is displayed when appears. Pattern title is not displayed on the monitor, it is only for
the reference of menu controller.
3. PATTERN SET – DATA FILL
Press FOCUS FAR button to start recording process. The dome saves all joystick
movements to its memory during this time. A number on monitor shows the percentage of
filled memory. Press FOCUS FAR button again in order to escape.
PATTERN SET
PATT NO
: 01
PATT TITLE: : PATTERN01□□□
DATA FILL
: 100%
SAVE
EXIT
DEFAULT SETTING