ABUS TVCC75200 - Manual (Page 67)

67
9. DOME SET – [NEXT PAGE] – [PASSWORD]
To enter this page for setting a password, move joystick to the right. The password is
selectable between number 001 and 255. Confirm with PRESET button. The default setting
is BLANK.
Press any number from 001~255 and preset button twice on password typing field and on confirm
field. Then “CONFIRMED” is displayed on the monitor and the menu will change to the previous
page automatically.
<CONFIRMED> <CANCELLED>
If user enters different numbers between PASSWORD and CONFIRM, “CANCELLED” is displayed
on the monitor and the menu will return to the previous page automatically if user fails 3 times.
 After setting a Password, the operator has to type in memorized password in order to enter OSD
MAIN MENU, or to change any stored settings, e.g. Pattern, Tour etc.
 The operator must remember the password for the operation since the manufacturer does not
provide a master password.
 Do not forget to leave menu with SAVE AND EXIT on first page.
ENTER PASSWORD
BY ENTERING PRESET
CODE
PASSWORD ***
CONFIRM ***
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CONFIRMED