Battery tray, Battery shelf mid-mount option, Enclosure top option – Alpha Technologies Te25xh User Manual

Page 13: Load center options

Advertising
background image

Argus Technologies Ltd.

029-006-C0 Rev D WC

Printed in Canada. © 2006 Argus Technologies Ltd. ARGUS is a registered trademark of Argus Technologies Ltd. All Rights Reserved.

Page 3 of 15

Figure 3–Inside upper front right (may not be exactly as shown)


Cable knockouts are provided for access through rear and bottom panels. Refer to outline drawings at the rear of
this manual.

GFCI outlet

Master ground bar

2.4 Battery

Tray

A single battery tray is included with the Te25xh Compact
Power Node for installing various battery models such as Alpha
Technologies 85-GXL or similar. The tray dimensions are
470mm D x 432mm W (18.5” D x 17” W).

NOTE: If bottom enclosure cable access is required, the battery tray

will only provide 406mm D (16” D) of useable space.

The battery tray is prewired with cabling for a single 48Vdc
string of batteries.

Also included is a heater mat for maintaining battery
temperature in cold climates. The mat is AC powered (connects
to GFCI) and is independently temperature controlled with a
built-in thermostat.

2.4.1

Battery Shelf Mid-Mount Option

An optional mid-mount battery shelf (037-169-20) is available:

Figure 4–Te25xh battery shelf mid-mount option

2.5 Enclosure

Top

Option

The Te25xh is equipped with a removable top cover and integrated lifting brackets.

2.6

Load Center Options

Optional circuit breaker AC load centers may be mounted on the right side of the enclosure. Refer to the
schematic at the back of this manual or in the final system documentation package.

Advertising