Alpha Technologies Te25xh User Manual
Page 34
c 2006 ARGUS TECHNOLOGIES
STEP 2: LADDER BRACKET INSTALLATION
W/ PLATFORM STYLE POLE MOUNT BRACKET
1. Install ladder bracket below enclosure by aligning obround holes
with holes in bottom pole mount bracket.
2. Use 3/8"-16 hardware (Item 11,17,18 and 26) to bolt together as
shown. Ensure the position of the ladder bracket is adjusted to
properly grip the pole.
Torque screws to 20 ft/lbs.
3. See page 3 for a general overview of installed ladder in position.
11
18
26
17
18
2 PLACES
REF
SIZE
DWG NO.
TYPE
B
SHEET
T I T L E
ISSUE
DATE
OF
SCALE
FOR MANUFACTURING WITHOUT ITS WRITTEN CONSENT.
ARGUS TECHNOLOGIES AND SHALL NOT BE COPIED OR USED
THESE DESIGNS AND SPECIFICATIONS ARE THE PROPERTY OF
REVISIONS
LTR
DESCRIPTION
APPD
DATE
REV
037-224-04
KIT, LADDER BRACKET
TEMPEST, Te25/Te25xh
2 3
D2
B
DIMENSIONS ARE IN INCHES WITH METRIC IN BRACKETS: INCHES [mm]
NTS
REV BY