Alpha Technologies Te25xh - Manual (Page 33)

SIZE DWG NO. TYPE
B
SHEET
T I T L E
ISSUE
DATE OF
TOLERANCES
SCALE
APPROVED
CHECKED
DRAWN
DESIGN MATERIAL
FINISH
FOR MANUFACTURING WITHOUT ITS WRITTEN CONSENT.
ARGUS TECHNOLOGIES AND SHALL NOT BE COPIED OR USED
THESE DESIGNS AND SPECIFICATIONS ARE THE PROPERTY OF
REVISIONS
LTR DESCRIPTION APPD DATE
REV
X.X 0 . 0 4 "
X.XX 0 . 0 2 "
X.XXX 0.01"
[X] 1mm
[X.X] 0 . 5 m m
[X.XX] 0 . 2 5 m m
037-224-04
KIT, LADDER BRACKET
TEMPEST, Te25/Te25xh
SEE B.O.M.
037-224-20
PER P.O. and
Doc. 070-024-83
1 3
VED
VED
2007/11
2007/11
D2
PART IDENTIFICATION
This part must be identified in accordance
with Argus document #071-014-10 by:
STAMPING
PART TAGGING
BOX PEN LABELING
PART
X
c 2007 ARGUS TECHNOLOGIES O
B
DIMENSIONS ARE IN INCHES WITH METRIC IN BRACKETS: INCHES [mm]
VED 2007/11
ME 2007/11
NTS
REV BY
ADDED Te25 DETAIL ON PAGE 3 VED 2007/12 B
2
1
2 PLACES
STEP 1: LADDER BRACKET ASSEMBLY
1. Unpack and inspect the ladder bracket for any damage.
Verify that all the required hardware is included.
2. Attach Item 1 to Item 2 using 3/8"-16 hardware provided
(Items 11,17, 18 and 26) as shown.
Torque screws to 20 ft/lbs.
18 11
17 18 26
2 PLACES