Alpha Technologies Micro Secure UPS - Manual (Page 24)

017-220-J0 Rev B
22
6.3 Using the Main Menu
The Alpha Micro Secure main menu screen runs on a command line system. This program does not recognize
the backspace or delete keys even if it appears that way on the monitor. If you make a mistake and press Enter,
the Alpha Micro Secure echoes the command back exactly as you typed it. Press Enter and retype the com-
mand again.
If you choose not to use the command line system, you can use the Alpha UPS Monitor to control and monitor the
Alpha Micro Secure
6.3.1 Main Menu Screen
The main menu screen shows the Alpha Micro Secure’s current input and output values, displays if any faults or
alarms are present and gives access to the submenus. It can be accessed from anywhere in the menu tree by
typing 0 and pressing Enter. The Alpha Micro Secure is controlled by submenu 3.
To access a particular submenu, type in the submenu number and press Enter. To update the main menu
screen, press Enter.
The complete menu tree is given in Figure 11. Tables describing the Line Status, Output Status, Faults and
Alarms displays are given in Tables G, H, I, and J.
a. The readings on the main menu screen do not automatically update to reflect changes in the
Alpha Micro Secure’s status. Press Enter to update the screen.
b. For many functions you need to enter a password. The factory setting is 1111.
Submenu Numbers
{
{
Status, Faults and
Alarms Displays
Figure 10 — Main Menu Screen