Alpha Technologies Micro Secure UPS - Manual (Page 32)

017-220-J0 Rev B
30
6.4.8 Viewing the Serial Number
To display the serial number of the Alpha Micro Secure UPS, type "∗QY0" at the command line and press "Enter".
6.4.9 Setting the Peukert Number and Capacity
You can set the Peukert Number and Capacity using the RS-232 interface or the web interface. To display the
current Peukert Number, type "∗QY6" at the command line and press "Enter".
To change the Peukert Number to 1.1345, type "∗ST6:1.1345" at the command line and press "Enter".
To display the current Peukert Capacity, type "∗QY7" at the command line and press "Enter".
To change the Peukert Capacity to 109.123, type "∗ST7:109.123" at the command line and press "Enter".
To determine the Peukert number and capacity of your battery, refer to "Puekert Number and Battery Capacity".