Alpha Technologies Micro Secure UPS - Manual (Page 34)

017-220-J0 Rev B
32
6.4.11 Communicating with the Alpha UPS Monitor
Introduction
The Alpha UPS Monitor graphical user interface (GUI) provides web or Windows© like computer communica-
tions with the Alpha Micro Secure The screen and its features are shown below. It is used to monitor, control and
set various parameters like the date and time, determine when to perform the weekly self test, change the relay
configurations, etc. The Fault or Alarm indicators show if the Alpha Micro Secure has experienced a malfunction
and the cause. Descriptions of all the screens and their functions are given in “Operation”
.
Figure 12 — Alpha UPS Monitor (UPS Specification Screen shown)
A Screen selection menus.
B Current UPS operating mode. This is updated automatically.
C
Fault and alarm indicators – when a light in this bar is illuminated, move the mouse
cursor over the light to determine the malfunction. Double-clicking on the light will
send you to the Alarms & Faults screen.
D Readout screens.
E Drop-down menus.
F Online indicator.
B
A
E
D
C
F