Alpha Technologies Micro Secure UPS - Manual (Page 26)

017-220-J0 Rev B
24
Table D — Line Status
Normal The line is within specifications. See specifications, “Boost/Buck/Line Transfer Thresholds”.
The Alpha Micro Secure is operating in Line mode.
Boost Line voltage is out of tolerance. The Alpha Micro Secure is operating in Boost mode.
Boost2 Line voltage is out of tolerance. The Alpha Micro Secure is operating in Boost 2 mode.
Buck Line voltage is out of tolerance. The Alpha Micro Secure is operating in Buck mode.
Buck2 Line voltage is out of tolerance. The Alpha Micro Secure is operating in Buck 2 mode.
Blackout The line is absent.
Freq low Line frequency is too low.
Freq high Line frequency is too high.
6.4.1 Line Status
Line status tells you the line’s condition. For an updated value, press Enter.
Table E — Output Status
Line mode
Battery mode
Battery mode, low bat. warning
Battery mode (testing battery)
Boost mode
Boost 2 mode
Buck mode
Buck 2 mode
Hot swap mode
Inverter off due to fault
Inverter off due to low battery
Inverter off at start-up
Shutdown due to user request
6.4.2 Output Status
Output status tells you how the Alpha Micro Secure is producing power. For an updated value, press Enter.