Alpha Technologies Micro Secure UPS - Manual (Page 62)

017-220-J0 Rev B
60
To upgrade the FXM firmware, browse to the .fbin or .bin file and click Send File to start the upload. This may
take a few minutes to complete.
Figure 51 — Upgrade Firmware
7.2 Updating the Micro Secure Firmware (no Communication Module)
Material Required
• Laptop with a DB-9 COM Port
Before Upgrading
• Install the FXMProgrammer software onto the laptop.
• Copy the upgrade firmware file (.sx or .fbin files) to a folder on the laptop.
Procedure
1. Pull out the battery fuse on the Micro Secure 100.
2. Turn off the AC input to the Micro Secure 100.
3. Short Jumper JP1 on the RS-232 board.
JP1