Alpha Technologies INEX 100A STS Module and MBS+PDU - Manual (Page 24)

Argus Technologies Ltd. 019-061-C0 Rev A WC
Printed in Canada. © 2009 Argus Technologies Ltd. ARGUS is a registered trademark of Argus Technologies Ltd. All Rights Reserved. Page 14 of 26
3. Connect DC INPUT wires.
Put both wires through the wire hole on the left side of the inverter shelf. Use the hex washer type nickel screws,
in the accessory kit, for fixing both DC INPUT wires.
4. Connect AC output/input/ground wires.
Connect AC input to the terminal on the back left of MBS/PDU according to the position of the silkscreen. Screw
the back cover onto the STS & Controller shelf.