B&K Precision 1696-1698 - Manual - Manual (Page 22)

22
Installation of software
1. Run Setup.EXE with installation disk that comes with the unit.
2. Follow the instructions in the setup program. During the running of the setup program, you may encounter "VERSION CONFLICT" remarks, ignore it
and click yes to complete the installation.
3. Finally a software icon is created in the program menu.
9.3 Operation Instruction for RS-232 Interface
1. Ensure that the PC is off; connect RS-232 to serial COM port of your PC and the power supply.
2. On your power supply, press the [SHIFT] key, and then quickly press [RS-232/485] key and select RS-232 (pressing the [RS-232/485] will
toggle between RS-232 and RS-485) followed by the [ENTER] key.
3. Switch your PC and run the program.
4. Click on Setup, and select the desired COM port. The default is set at COM port 1.
5. Click on Supply Connect, and then click on Single in the drop menu.
6. An "Internal Timed Program" window will appear. Click on the Data Log header on the top left and a window as shown in Fig 1 will appear.
Note:
When the right bottom comer of the display windows shows the UVI, value, connection to the PC is made correctly and the power supply is
operating normally.