B&K Precision 1696-1698 - Manual - Manual (Page 28)

28
16. OUTPUT
Left click on icon will switch on or off the output.
Internal Timed Program
The PC interface remote mode really eliminates the tedious process in keying in groups of entries on the power supply. Because all the data are displayed together
in the monitor, the possibility of wrong entry is greatly reduced. Data of different groups can be classified, store, exported and retrieved for use at any time.
Retrieved data will be in red color if they exceed the present pre-set limits of voltage in upper voltage level or current limiting value.
The operation principle of Saving, Exporting, Filing, Deleting and Printing are the same as the Data Log function.
CLEAR TABLE ................................... Deletes all data on the display table to prepare for new data entry.
SAVE TO PS ....................................... Transfers data from the Display table to the power supply.
READ FROM PS ................................. Get data from the power supply.
RUN ....................................................... To run the timed program.
Running Cycle
Enter the number of the desired running cycles here, Maximum cycles is 232.
Operation
1.
Clear old data in the power supply by first click [Clear Table] then click [Save to PS].
2. Check if no data in power supply by clicking [Read Fro PS].
3. Enter data in the table using the Up/ Down/ Left/ Right keys on PC keyboard for new locations.
232