B&K Precision 1696-1698 - Manual User Manual
Page 34
34
You can click on the data log to select the power supply, the data log will highlight in blue and the address bar in the left bottom window will show the selected
power supply.
3.
Show Digital - one click and will show the digital readings of all the connected power supplies.
4.
Show Log - one click and it wi11 show the data log of all the connected power supplies.
5.
Single Alleyway Displays - one click and it will only display the Data Log of the selected power supply (Fig. 10). It will disable the icon (2, 3, & 4). The
parameter at the bottom is the same as the Data Log Window in RS-232 Interface on Page 14.
The All SP Tick box --- Tick to apply the parameters to all Data Log Windows in Multi Alleyway Display.
(FIG. 9)