B&K Precision 1696-1698 - Manual - Manual (Page 30)

30
3. On your power supplies, press [SHIFT] key, then quickly press [RS-232/485] key and select RS-485.
4. A 3-digit number will be displayed. This number is the address assigned to the power supply and will be used in the
software.
5. Using the Key Pad to key in the address to assign for each power supply. The range is 001-031 and each of the power
supplies requires a unique address.
6. Switch on your PC and run the SDP program.
7. Click on set up and select the desired Com. Port 1.
8. In the tool bar, click on supply connect, then click on single in the drop menu.
9. An internal timed program window will appear.
10. By choosing the address in the address field (Fig. 5) you can input the desired settings for each power supply as given in Section
9.3 on page 12.
(FIG 4)