B&K Precision 2542B-GEN - Manual - Manual (Page 154)

Arbitrary Waveform Generator
154
Square Output
Press the Output Type softkey to select Square waveform,
SQUARE menu will be displayed.
Softkey Description
Output
Type
Press Output Type to select a
standard waveform or modulated
signal to output
Freq
Press Freq to select the frequency
parameter. Use the left or right
keys below the adjustment knob
to change cursor selection
(selection will be in red color) and
rotate the adjustment knob to
change the value of the selected
digit. When a unit is selected (i.e.
Hz, kHz, MHz), rotating the knob
will change the parameter upward
or downward by x10. Units will
automatically change accordingly.
Ampl
Press Ampl to select and change
the amplitude parameter.
Offset
Press Offset to select and change
the offset parameter.