B&K Precision 2542B-GEN - Manual - Manual (Page 24)

Getting Started
24
10. Horizontal readout shows the Main or Delayed time
base.
11. Channel readouts show the scale factor, coupling,
bandwidth limit, digital filter, and invert status.
12. Waveform baseline icons show the zero-volt level of the
waveforms. The icon colors correspond to the waveform
colors.
1.5 Quick Check
Upon receiving the instrument, inspect for any noticeable
physical damages or unresponsive panel buttons. If there
are any problems, please contact B&K Precision
immediately.
Power On Check
Connect the AC Power Cord to the power input socket on the
side of the DSO. Press down the power switch button at the
top of the DSO to the ON position ( ). Verify that the
instrument turns on and the LCD screen goes into an initial
boot screen.
Press any key for the screen to load into the main screen
showing the graticule. Contact B&K Precision if the DSO
fails to load the main screen.