B&K Precision 2542B-GEN - Manual - Manual (Page 98)

Menu Operation
98
Pass/Fail
The oscilloscope first measures the input source signal and
compares it with Pass/Fail settings, and then outputs the
Pass/Fail result.
Press UTILITY
→ Pass/Fail to display the PASS/FAIL menu
1/2.
Softkey Options Description
Enable Test
ON Pass/Fail function on
OFF Pass/Fail function off
Source
CH1 Source signal CH1
CH2 Source signal CH2
Operate

Start Pass/Fail test

Stop Pass/Fail test
Setup Mask ---- Set up the regulations
More 1/2 ---- Display the menu 2/2