B&K Precision 2542B-GEN - Manual - Manual (Page 214)

Remote Control
214
7.1 Comsoft Software
The 2540B and 2542B comes with Comsoft application
software which provides most of the controls of the
oscilloscope’s display, measurements, waveform data, and
front panel emulation control through the USB device port in
the rear panel. It also supports creating and *uploading
arbitrary waveforms for models 2540B-GEN and
2542B-GEN.
*Uploads up to 8kpts into volatile memory.
The software is free and can be downloaded at
www.bkprecision.com
7.2 Web Browser GUI
The DSO has a build-in web browser interface that can be
used for some basic LAN configurations and quick
screenshot capture via LAN interface at the rear panel.
To access, simply set the DSO to LAN interface and
configure all the necessary settings (see “I/O Setup” section).
Noting the IP address configured on the oscilloscope, enter it
at the address bar of a Java enabled web browser for access.