B&K Precision 2542B-GEN - Manual - Manual (Page 210)

Quick Start Guide
210
6.10 Create Waveform with Added Noise
This section will demonstrate a quick way to create a sine
wave with added random noise. In this example, we will
create this waveform with a frequency of 1 kHz and amplitude
of 2 Vpp.
Follow the steps below:
1. Press the MENU key to enter the ARB menu, and set
Output Type to DCOM.
2. Select Carrier Shape softkey and set it to Sine.
3. Set the Carrier Freq to 1.000000 kHz, and set
Carrier Ampl to 2.000 Vpp.
4. Then, select More 1/2 softkey and set Mod Shape
parameter to Noise. You can also change the
frequency of the noise waveform by selecting and
specifying Mod Freq parameter.
5. Now, press the ON/OFF key to turn on the generator
output, and the waveform will be a sine wave with
noise added as illustrated below.