DE-STA-CO F5-B AC Inverter Drive - Manual (Page 45)

45
Program Revision
Identifier
Customer
Identification
Number
This parameter identifies the revision number of the programing in
the drive. This will allow for easy identification of errors or
upgrades to the software. Please don't change this parameter.
The customer identification number allows verification of the programming
in the inverter. This will simplify identification of software. Please don't
change this parameter.
Adjustment of the Drive
Adjustment range: 0 ... 65355
Resolution: 1
Factory setting: 1
Adjustment range: 0 ... 65355
Resolution: 1
Factory setting: 10141
Setting Function
-2; S_int Positioning Off
-1; Off Positioning Off
0.00...327.67 Positioning On; positioning delay by
adjusted value
Factory Setting 0.00; Positioning On; No delay