DE-STA-CO F5-B AC Inverter Drive - Manual (Page 52)

52
Quick Reference
When switching on the KEB COMBIVERT F5, the value of parameter CP.1
appears in the operator display. (see "Drive Mode" to switch the keypad
function)
The function key (FUNC) changes between the parameter value and
parameter number.
With UP ( ) and DOWN ( ), the value of the parameter number is
increased/decreased.
Password Input
FUNC.
SPEED
START
FUNC.
SPEED
ENTER
F/R
FUNC.
SPEED
START
FUNC.
SPEED
ENTER
F/R
Releasing the
CP-Parameters
Locking the CP -
Parameters
(Read only)
From the factory, the frequency inverter is supplied without
password protection, this means that all parameters can be
adjusted. After programming, the unit can be protected
against unauthorized access thus preventing the values from
being changed.
Parameter Display