Climax LM5000 OBS Portable MILL - Manual (Page 12)

12 05/99
PM5000 Components
(A) Main bed assembly
Main bed has a 8" (203.2 mm) slide and 12" (304.8
mm) wide mounting flange. Flush-mount leadscrew
bearings enable the machine to fit into areas as small
as the length of the bed (plus the length of one feed
mechanism). Assembly features a full-length lead-
screw and anti-friction, high lubricity polymer on the
ways.
27218 48" (1219.2 mm) travel main bed assembly
27219 72" (1828.8 mm) travel main bed assembly
27220 96" (2438.4 mm) travel main bed assembly
22643 (B) 14" (355.6 mm) travel ram and cross slide
assembly
The ram and cross slide assembly feed the milling
head across the main bed. Because the ram and main
bed saddle have the same bolt hole pattern, the ram
can be offset in 3.38"(85.85 mm) increments and/or
positioned 90 o around the saddle. The cross slide
features dovetail ways and a full-length leadscrew.
20888 (C) 6" (152.4 mm) travel vertical slide assembly
The vertical slide assembly mounts to the ram and
cross slide saddle to provide vertical movement for the
milling head. Because the cross slide saddle and the
vertical slide have the same bolt hole pattern, the
vertical slide can be offset and/or positioned 90 o around
the saddle. The vertical slide features dovetail ways, a
full-length leadscrew, and handwheel.
(D) Manual feed assembly
Handwheel assembly fits into either end of the
leadscrew. Dial is graduated in .010" increments. One
full turn of the dial equals .200" (5.08 mm). Though the
machine can use more than one type of feed, each axis
must have its own feed assembly. (The Z-axis includes
its own handwheel.)
20808 Manual feed assembly - bed assembly (X-axis)
23650 Manual feed assembly - ram assembly (Y-axis)
(D) Standard electric feed assembly
1/8 hp (.09 kW) electric feed assembly attaches directly
to either end of the main bed or ram leadscrews and
provides 2:1 reduction feed. Unit has three mounting
positions to clear obstructions. Feed speed and
direction controls are on the feed unit. Dial is graduated
in .001" increments. One full turn equals .100" (2.54
mm). Feed speed is up to 10" (254 mm) per minute.
Includes switches (not shown). Recommended for
horizontal applications only.
21786 Electric feed assy, 48" (1219.2 mm) travel main bed
21509 Electric feed assy, 72" (1828.8 mm) travel main bed
22747 Electric feed assy, 96" (2438.4 mm) travel main bed
21512 Electric feed assy, ram and cross slide
NO. DESCRIPTION
Drawings may not represent
actual product.