Pm5000 components – Climax LM5000 OBS Portable MILL User Manual
Page 15
05/99 15
NO.
DESCRIPTION
(I) Riser assembly
Riser assembly raises the milling head up from the
main bed. Assembly includes riser, studs and nuts, and
key.
For overhead milling, riser(s) totaling a
minimum of 3" (76.2 mm) are required. Risers
totaling 5" (127 mm) or more are recommended.
25021
1" (25.4 mm) Riser assembly
21593
2" (50.8 mm) Riser assembly
25022
3" (76.2 mm) Riser assembly
25023
4" (101.6 mm) Riser assembly
25024
5" (127.0 mm) Riser assembly
25025
6" (152.4 mm) Riser assembly
Optional riser studs
Order optional riser studs when using a combination of
risers to raise the milling head up from the main bed.
Four studs required.
25030
Stud - 1" (25.4 mm) total riser height
21595
Stud - 2" (50.8 mm) total riser height
25031
Stud - 3" (76.2 mm) total riser height
25032
Stud - 4" (101.6 mm) total riser height
25033
Stud - 5" (127.0 mm) total riser height
25034
Stud - 6" (152.4 mm) total riser height
25040
Stud - 7" (177.8 mm) total riser height
PM5000 Components
Drawings may not represent
actual product.