Climax BB6000 PORTABLE LINE BORING MACHINE - Manual (Page 11)

6/00 11
Specifications in inches (mm)
Specifications subject to change without notice.
For precision dimensions consult your factory representative.
BB6000 Technical Information
Boring diameter:
Standard
6 (152.4) min
36 (914.4) max.
Machine ship weight (approx.): 640 lb (291 kg)
Typical machine consisting of rotational drive assembly
(22221), axial feed assembly (23299), manual boring
head set (22383), two three-arm bearing assemblies
(22072), and 3.5" diameter x 8 foot boring bar (22110).
Boring bar:
Ship weight (approx.):
3.5" dia x 5 ft bar (22107): 175 lb (80 kg)
3.5" dia x 12 ft bar (22114): 518 lb (236 kg)
Ship dimensions:
3.5" dia x 12 ft bar: 11 x 13 x 154 (28 x 33 x 392cm)
Hydraulic power unit (10 hp):
Ship weight (approx.): 500 lb (228 kg)
Ship dimensions (approx.):
27 x 33 x 48 (69 x 84 x 122 cm)
Components:
Mechanical axial feed assembly:
Feed rate variable, reversible, .003-.020/rev.
(.076-.508/rev)
Rotational drive assembly:
Net weight (w/o motor): 86 lb (40 kg)
Gear ratio:
6:1 gear reduction
(Theoretical values calculated using a 5 hp hydraulic
power unit producing 1200 psi (8268 kPa) continuous,
2000 psi (13780 kPa) intermittent and pumping 6 gpm
(22.7 l/min.).
With 17.9 in 3 (293.6 cm 3 ) hydraulic motor (25478):
Boring bar torque: 1292 ft•lb (1757 n•m)
Max boring rpm: 12 rpm @ 6gpm
(12 rpm @ 22.7 l/min)
Boring bar: 3.1 hp (2.3 kW)
Motor, hydraulic:
Displacement:
3.6 - 17.9 in 3 (59.1 - 293.6 cm 3 )
Net weight: 15.5 - 19.2 lb (7.1 - 8.7 kg)
Fittings: 7/8-14 SAE O-ring
Bearing support assembly:
End mount three-arm bearing diameter range:
12-20 (304.8-508.0)
End mount four-arm bearing diameter range:
18-38 (457.2-965.2)
ID-mount bearing ID diameter range:
12-37.53 (304.8-953.3)
Mounting spiders require 5/8" or smaller bolts
Manual boring head assembly:
Tooling:
.5" (12mm) square HSS tool bits
1" square indexable carbide
tooling (ass'y requires tool carrier)
Diameter range: 6-36 (152.4-914.4)
Mechanical feed facing head assembly:
Feed rate: automatic, up to .010/rev (.254/rev)
Stroke:
4 (101.6)
Facing diameters:
Using 24" boring head set spacers:
10.5 - 24.0 (266.7 - 609.6)
Using 36" boring head set spacers:
10.5 - 36.0 (266.7 - 914.4)
Tooling: .5" (12mm) and 1" (24mm) square
HSS or 1" square indexable carbide
tooling (ass'y requires tool carrier)
Boring bar:
Chromed, with full-length leadscrew. Bar end caps with
anti-friction leadscrew bearings allow the axial feed
assembly to be mounted to either end of the bar.
Net weight:
3.5" dia. x 5 ft: 175 lb (80 kg)
3.5" dia. x 12 ft: 518 lb (236 kg)
Hydraulic power unit:
Net weight:
5 hp: 400 lb (182 kg)
10 hp: 500 lb (228 kg)
Power sources: 3-phase electric or 1-phase electric