Climax BB6000 PORTABLE LINE BORING MACHINE - Manual (Page 9)

6/00 9
BB6000 Components
No. Description
22680 Mechanical feed facing head
assembly
Facing head assembly mounts to
tool carrier (not included) with
screws and, if required, spacers. The
range of diameters the facing head
will machine is determined by the
number of spacers (not included)
mounted between the tool carrier
and the facing head. When used with
the spacers from the 24" boring head
set (22769), the facing head will
machine 10.5" to 24.0" (266.7 to
609.6 mm). When used with the
spacers from the 36" boring head set
(22383), the facing head will
machine 10.5" to 36.0" (266.7 to
914.4 mm). Stroke is 4" (101.6 mm)
and feed rate is up to .010" (.254
mm) per feed trip. Use multiple trip
mechanisms to increase feed rate.
Facing head uses .5" (12mm) tool
bits. Customer must purchase
boring head set (spacers), tool
carrier and tool bits separately.
Boring bar/leadscrew assembly
3.5" (88.9 mm) diameter chromed
bar with full-length leadscrew. Bar
end caps enable the axial feed
assembly to be mounted to either
end of the bar. Other length bars are
available upon special request.
25221 Boring bar, 4 ft (1.22 m)
22107 Boring bar, 5 ft (1.53 m)
22108 Boring bar, 6 ft (1.83 m)
22109 Boring bar, 7 ft (2.13 m)
22110 Boring bar, 8 ft (2.44 m)
22111 Boring bar, 9 ft (2.75 m)
22112 Boring bar, 10 ft (3.05 m)
22113 Boring bar, 11 ft (3.35 m)
22114 Boring bar, 12 ft (3.66 m)
22771 1,2 Tool kit
Complete set of tools needed to
operate the BB6000 Portable boring
bar.
No. Description
5 hp (3.73 kW) hydraulic power unit
Variable displacement piston pump
power unit comes complete with a 5
gallon (19 liter) reservoir, start/stop
pendant, flow control, pressure
gauge, 20 foot (6 meter) x 3/8"
hydraulic hoses with quick
disconnect fittings, and 7/8-14 SAE
O-ring fittings for hydraulic motors.
Order motors separately
25325 Hydraulic power unit
3-ph/230V/60 Hz/1800 rpm motor.
Pumps 6gpm (22.7 l/min). Full load
13.2 amps.*
25319 Hydraulic power unit
3-ph/460V/60 Hz/1800 rpm motor.
Pumps 6gpm (22.7 l/min). Full load
6.6 amps.*
25320 Hydraulic power unit
3-ph/550/50Hz/1400 rpm motor.
Pumps 6gpm (22.7 l/min). Full load
5.6 amps.*
25321 Hydraulic power unit
3-ph/575V/60 Hz/1800 rpm motor.
Pumps 6gpm (22.7 l/min). Full load
5.5 amps.*
25322 Hydraulic power unit
3-ph/230V/60 Hz/1800 rpm motor.
Pumps 6gpm (22.7 l/min). Full load
22.8 amps.*
25323 Hydraulic power unit
3-ph/220V/50 Hz/1400 rpm motor.
Pumps 5gpm 19.0 l/min). Full load
22 amps.*
24592 Hydraulic power unit
3-ph/440/50 Hz/1400 rpm motor.
Pumps 5gpm (19.0 l/min). Full load
5.5 amps.*
24593 Hydraulic power unit
3-ph/220V/50 Hz/1400 rpm motor.
Pumps 5gpm (19.0 l/min). Full load
14 amps.*
24594 Hydraulic power unit
3-ph/380V/50 Hz/1400 rpm motor.
Pumps 5gpm (19.0 l/min). Full load
8.12 amps.*
24595 Hydraulic power unit
3-ph/200V/50 Hz/1400 rpm motor.
Pumps 5gpm (19.0 l/min). Full load
15.4 amps.*
*Full load amp rating cannot be
used to determine required
generator size. Contact your
generator manufacturer/dealer to
determine required generator size.
Drawings may not represent product.
1 Included in component package 23222.
2 Included in component package 23223.