DE DIETRICH NEO 2.1 - Manual (Page 23)

4.5.6. Mounting for an installation with 2
collectors
n Positioning the solar collectors
1. Screw the lower fastening lugs onto the bottom batten.
2. Position the collectors. The fastening lugs must be fitted into the
holding groove.
3. Postion the upper fastening lugs in the holding groove on the
collectors and screw them onto the batten.
The solar panels should only be installed shortly before the solar-
heating system is to be commissioned. This will minimise the time that
the solar panels are exposed to heat while not filled with heat-
transporting fluid.
C003456-F
66
0
40
0
20
0
mi
ni
66
0
1
2
3
3
3
3
3
1 2
1 2
1 2
1 2
80
165
NEO 2.1 / SUN 211 4. Installation
20/02/2013 - 300024195-001-02 22