DE DIETRICH NEO 2.1 - Manual (Page 49)

CAUTION
4
If the collectors are mounted with the flow and return
connections at the bottom, reposition and tighten the
fittings before putting the lower roofing plate in place.
4
Check that the rigid flap is flush against the ridge
tiles. The lead flap should be moulded to the shape
of the tiles in order to allow as little daylight as
possible between tiles and flap along the entire
length.
1. Position the lower right roofing plate.
2. Position the lower central roofing plate.
3. Position the lower left roofing plate.
4. Put the lower right roofing plate in place. Put the lower right clip in
place.
5. Put the lower central roofing plate in place. Put the lower central
clip in place.
6. Put the lower left roofing plate in place. Put the lower left clip in
place.
NEO 2.1 / SUN 211 4. Installation
20/02/2013 - 300024195-001-02 48