DE DIETRICH NEO 2.1 - Manual (Page 54)

3. Hook the left roofing plate on to the upper clip. Fold the assembly
over downwards while pulling the part upwards.
Check that the lugs on the side flaps are slotted into the
part on top of the roofing units.
4. Insert the screws.
n Fitting the fastening lugs and the tile rests
1. Secure the side flaps and the top flaps with the sheet metal plates
.
2. Position the left tile rest on the upper flap 10 cm from the top.
Fit the flap to one of the battens using straps.
Cut the battens added to the original battening level with the side
flaps.
M002311-C
2
3
4
1
1
1
1 1 2 3 4
2 3 4
4. Installation NEO 2.1 / SUN 211
53 20/02/2013 - 300024195-001-02