DE DIETRICH NEO 2.1 - Manual (Page 52)

2. Place the assembly of A + B on the lower flap.
- Flap A should be flush with the top of the collector.
- Flap B should be aligned with the bottom of the lower sheet metal
plate.
3. Fit the side clip C.
4. Put the right side flaps D and E in place.
- Flap D should be placed as far over flap E as it can go to cover
it.
- Flaps D and E should be correctly aligned.
5. Place the assembly of D + E on the lower flap.
- Flap D should be flush with the top of the collector.
- Flap E should be aligned with the bottom of the lower sheet metal
plate.
6. Fit the side clip F.
7. Put the upper junction parts in place.
8. Put the lower junction parts in place.
9. Insert the screws.
4. Installation NEO 2.1 / SUN 211
51 20/02/2013 - 300024195-001-02