DE DIETRICH NEO 2.1 - Manual (Page 58)

n Connecting the solar collector
CAUTION
Install the temperature sensor in the sensor tube on the
solar collector.
The transfer of heat between the sensor socket and the
temperature sensor can be improved by the use of heat-
conducting paste on the temperature sensor.
1. Fit the collector/tank connections. Tighten the clamping ring screw
connections correctly.
2. Fit the temperature sensor. Push the temperature sensor through
the gasket.
A
M002314-D
B + C
A
2
1
B
C
4. Installation NEO 2.1 / SUN 211
57 20/02/2013 - 300024195-001-02