DE DIETRICH NEO 2.1 - Manual (Page 61)

n Fitting the lower roofing plate
CAUTION
4
If the collector is mounted with the flow and return
connections at the bottom, reposition and tighten the
joints before fitting the lower roofing plate.
4
Check that the rigid flap is flush against the ridge
tiles. The lead flap should be moulded to the shape
of the tiles in order to allow as little daylight as
possible between tiles and flap along the entire
length.
1. Position the lower plate.
2. Put the lower sheet metal plate in place.
3. Fit the lower clip.
M002315-E
B
1
2
3
A-A
A
A
NEO 2.1 / SUN 211 4. Installation
20/02/2013 - 300024195-001-02 60