DE DIETRICH NEO 2.1 - Manual (Page 26)

n Fitting the upper seals and clips
1. Clean the support surface. Fit the seal, without the clamp, into the
upper groove on the 2 collectors.
2. Clean the surface before fitting the flat seal to it. Glue the flat seal
along the entire width of the 2 collectors.
3. Fit the upper clips using the mallet.
A
C003459-B
A
1
2
3
2
1
3
3
3
3
3
A
4. Installation NEO 2.1 / SUN 211
25 20/02/2013 - 300024195-001-02