DE DIETRICH NEO 2.1 - Manual (Page 35)

2. Place the assembly of A + B on the lower flap.
- Flap A should be flush with the top of the collector.
- Flap B should be aligned with the bottom of the lower sheet metal
plate.
3. Fit the side clip C.
4. Put the right side flaps D and E in place.
5. Place the assembly of D + E on the lower flap.
- Flap D should be flush with the top of the collector.
- Flap E should be aligned with the bottom of the lower sheet metal
plate.
6. Fit the side clip F.
7. Put the upper junction part in place.
8. Put the lower junction part in place.
9. Put the screw in place.
NEO 2.1 / SUN 211 4. Installation
20/02/2013 - 300024195-001-02 34