Burkert Type 8186 - Manual (Page 23)

In the menu item "Sensor-TAG" you edit a 12-digit measurement loop
name. An unambiguous designation can hence be assigned to the
sensor, e.g. the measurement loop name or the tank or product
designation. In digital systems and in the documentation of larger
plants, a singular designation should be entered for exact identification
of individual measuring sites.
The available digits comprise:
l Letters from A … Z
l Numbers from 0 … 9
l Special characters +, -, /, -
In this menu item, the PIN is activated/deactivated permanently.
Entering a 4-digit PIN protects the sensor data against unauthorized
access and unintentional modifications. If the PIN is activated
permanently, it can be deactivated temporarily (i.e. for approx. 60 min.)
in any menu item.
Only the following functions are permitted with activated PIN:
l Select menu items and show data
l Read data from the sensor into the indicating/adjustment module.
Caution:
With active PIN, the adjustment via PACTware/DTM as well as other
systems is also blocked.
In delivery status, the PIN is "0000".
This menu item enables the setting of the requested national
language.
Setup/Measurement
loop name
Lock setup/adjustment
Display/Language
Indicating and adjustment module 23
6 Setup - sensors from software 4.0.0
41787
-
EN
-
120316