Burkert Type 8186 - Manual (Page 28)

In this menu item you can define the indication of the measured value
on the display.
The default setting for the indication value is for example distance with
radar sensors.
In this menu item you can define the scaling unit of the measured value
on the display.
In the menu item "Scaling", the requested numerical value with
decimal point is entered for 0 % and 100 % of the measured value.
In this menu item you can simulate measured values via the current
output. This allows the signal path to be tested, e.g. via downstream
indicating instruments or the input card of the control system.
How to start the simulation:
1 Push [OK]
Display/Displayed value
Display/Scaling size
Display/Scaling
Diagnosis/Simulation
28 Indicating and adjustment module
6 Setup - sensors from software 4.0.0
41787
-EN
-120316