Burkert Type 8186 - Manual (Page 24)

In the delivery status, the sensor is set to the ordered national
language.
The optionally integrated background lighting can be adjusted via the
adjustment menu. The function depends on the height of the supply
voltage, see operating instructions of the respective sensor.
The lighting is switched off in the delivery status.
In this menu item, the device status is displayed.
The respective min. and max. measured value of the electronics
temperature is saved in the sensor. These values as well as the actual
temperature value are displayed in the menu item "Peak values".
In this menu item you select the measured variable of the system and
the temperature unit.
A linearization is necessary for all vessels in which the vessel volume
does not increase linearly with the level - e. g. with a horizontal
cylindrical or spherical tank - and the indication or output of the volume
is required. Corresponding linearization curves are preprogrammed for
these vessels. They represent the correlation between the level
percentage and vessel volume. The linearisation applies to the
Display/Lighting
Diagnosis/Device status
Diagnosis/Electronics
temperature
Additional settings/De-
vice units
Further settings/Lineari-
zation
24 Indicating and adjustment module
6 Setup - sensors from software 4.0.0
41787
-EN
-120316