Installation instructions – Hydrotech FreshPoint U440 Ultrafiltration System User Manual
Page 21
Advertising
Page 21
Remove the Technician’s Decay Test Components.
Repressurize the module with water by slowly opening the inlet valve of the bypass plumbing arrangement.
Close the downstream faucet was opened for the test, or reconnect the outlet union, when air is no longer
being expelled.
Press Extra Cycle button to flush trapped air from the feed side of the module.
Open the flush tank valve, if present.
Reconnect the inlet solenoid valve wiring harness, if applicable.
19.
20.
21.
22.
23.
24.
Installation Instructions
Figure 8: Integrity Test Simplified Diagram
42613_REVA
Advertising